1, Please use a qualified DC power adapter, otherwise it may cause instable charging.
2, Do not put metal debris or magnetic card on the charging board or it may cause damages or abnormalities to the charger.
3, During the application process if the receiving coil or the launch plate are overheating, then it leads to stop charging, please remove the charging device. When that is cooled down, then tries to recharge again.
* Do not squeeze or crash.
*Do not pull the power cord hard and avoid breaking or falling off the power cord.
* Do not disassemble or put EnergyPad-B85UF into fire, water. To avoid short circuit leakage.
* Do not use EnergyPad-B85UF in severe high temperature, humid or corrosive environment to avoid damage to the circuit which may cause leakage phenomenon.
Solutions to frequently-asked questions
1, Why the phone does not charge?
The phone is not aligned to the charging sensor area or the receiving coil is not properly installed.
2, Why the charger has high temperature?
During wireless charging process, the high temperatures in receiving coil or launching plate are normal.
3, Mobile phone has intermittent charging ability?
Adapter charging current is not enough or the voltage is instable, please use 5V / 2A adapter 9V 1.67A
Charging position is too far away, electromagnetic induction is not good, the charging position can be adjusted.
4, The host light is normal, but the phone fails to work?
There are failures in receiver coil of mobile phone, it is recommended to update the receiving coil or repair the phone. (Built-in receiver coil)
5, Low charging speed?
Mobile phone itself or external receiver coil allows different current of the wireless charging, when the phone is charging, the standby power has big consumption. It is recommended to reduce the phone standby program; or the adapter does not reach 5V / 2A, please select the regular adapter. (Other questions please contact with the after sales service)
Appearance, material and function diagram